DrinkX logo
ENRU
Enquire
AEROMILK / MILK MODULE

Milk and foam, now under your full control.

Temperature1 °C steps
65°C
Aerationfoam density
15%
Dosing1 ml precision
150ml

This is AEROMILK.

Get a price
Milk pouring from the X-TAP tap
X-TAP tap and order screen on a bar counter; under the countertop the AEROMILK module stands on a fridge 1234
01 / HOW IT IS INSTALLED

On the counter, a tap. Underneath, AEROMILK.

AEROMILK goes under the countertop: next to the fridge or right on top of it. Milk flows from the fridge into AEROMILK, where it is heated and frothed, and comes out through X-TAP.

  1. 01

    X-TAP tap

    On the countertop, one Ø38 cutout. Pours milk and foam.

  2. 02

    Order screen

    The barista picks a recipe or sets up their own.

  3. 03

    AEROMILK

    Heating and aeration without steam. 140 × 310 × 275 mm.

  4. 04

    Fridge

    Milk is kept at 4 °C.

02 / HOW IT WORKS

Intelligent milk frothing system

At the press of a button AEROMILK makes hot or cold milk foam, as well as hot or cold milk. Its steam-free technology delivers rich taste, perfect texture and a creamy consistency, with consistent quality and high speed.

Automatic cleaning.

03 / FOAM

Any density, set by the recipe

Foam density and milk temperature are fully adjustable in the recipe. Cappuccino is the same morning and evening, whoever is behind the counter.

Glass: Hot milk, for cocoa and tea

Hot milk

for cocoa and tea

Glass: Latte, a thin layer of foam

Latte

a thin layer of foam

Glass: Flat white, microfoam

Flat white

microfoam

Glass: Cappuccino, dense foam

Cappuccino

dense foam

Glass: Cold foam, for iced latte, 4 °C

Cold foam

for iced latte, 4 °C

04 / MILK

Any type of milk — and even cream

Dairy, lactose-free, plant-based — oat, almond, soy, coconut — and cream. AEROMILK produces stable foam on each, and with the MILKX switching system up to 10 types connect to one module: the guest picks a drink, the module draws the right milk.

DairyLactose-freeOatAlmondSoyCoconutCreamup to 10 types with MILKXMILKX05101520ml/sAEROMILK330 ml · 25 sDairyDairyLactose-freeOatAlmondSoyCoconutCreamup to 10 types with MILKXMILKX05101520ml/sAEROMILK330 ml · 25 sDairy
05 / APPLICATIONS

Applications

  • Coffee shops
  • Cafés
  • Restaurants
  • QSR
Video: AEROMILK in a coffee shop, a café, a restaurant and a quick-service restaurant
06 / NEXT

Start with milk. Add coffee and syrups later.

AEROMILK is one of four modules of the DrinkX system. Connect ULTRABREWER for black coffee, SMARTDISPENSER to dose syrups or other liquids (tea, fruit drinks and more) and the FLOW-X water heating module, and the same tap starts dispensing complete drinks without a barista.

AEROMILK milk module
AEROMILK
ULTRABREWER coffee module
ULTRABREWER
SMARTDISPENSER syrup dosing module
SMARTDISPENSER
FLOW-X water heating module
FLOW-X
How the DrinkX station works →
07 / SPECS

Technical data

Heatingin-line: thick-film printed heater, no steam boiler
Foammechanical, steam-free
Milk temperature4–75 °C
Dispensing330 ml in 25 s
Milkany milk, including plant-based · up to 10 types with MILKX
Milk feedgear pump
Foam densityset in the recipe
Module (W × D × H)140 × 310 × 275 mm
Power1P+N+PE, ~220 V (±10 %), 50 Hz · 3.2 kW / 14 A · protection class I
Cabledetachable, IEC C20 connector, Schuko plug, 2 m
Connectionsrear panel: milk and water inlets, milk, water and air outlets, drain, sewer outlet, LAN (RJ45), MILKX valve control connector
Installationunder the countertop or inside a cabinet; space behind the module for ventilation and connections
Cleaningautomatic
X-TAP tapheight 276 mm · spout reach 181 mm · spout clearance 158 mm · base Ø140 mm · polished stainless steel or 6 colours · 2 M8 studs
X-DESK order screen195 × 400 mm panel on a stem, 520 mm above the countertop
Tap cutoutØ38 + two Ø8.5, 90 mm centre to centre
Drip tray cutout140 × 140 mm (corners R2 max), visible opening 125 × 125 mm
08 / FAQ

Quick answers

How much does it cost?

The price depends on the configuration: how many milk types you need and whether you need a fridge. We will send a quote after a short call.

Will it work with my coffee machine?

AEROMILK does not connect to the coffee machine. It has its own tap. The barista makes espresso as usual and pours milk from X-TAP.

Which milk can I use?

Any milk: dairy, lactose-free or plant-based. MILKX connects up to 10 types to the module at once.

How is it cleaned?

The module cleans itself automatically. We will send the daily servicing instructions with the quote.

Can I add coffee later?

Yes. You can connect the ULTRABREWER coffee module, the SMARTDISPENSER syrup doser and the FLOW-X water heater to AEROMILK. The tap stays the same.

Get an AEROMILK quote for your site

Leave your phone number. We will call back within the working day and send a quote.

We will call back within the working day.